【次に流行るのはこれ⁉】バレエコアネイル★ジェルで作る3Dの作り方必見！アクリルパウダー苦手な方はこれを試してみて！

【次に流行るのはこれ⁉】バレエコアネイル★ジェルで作る3Dの作り方必見！アクリルパウダー苦手な方はこれを試してみて！

Hello, I’m Miki Nohara, Cocoist art director. Today I would like to explain a cute design that combines 3D ribbons made with gel, so please read until the end. Today I will be demonstrating to the tip, so

I will omit the application of base gel etc. The base material we will be using today is this one from Cocoist. Today we will be using No. 19 Mauve Satin from the Satin Magnet series. It’s my favorite color. Yes, I will use this. Okay, now let’s apply it to the tip.

Yes, this is the Sate Magnet Series.This is common to all of the magnet series released by Cocoist, but if you apply too little, the magnet will inevitably move slowly, so please apply it generously to your eyes. I think I will fail. So it’s a brush type gel, but

I think it will apply beautifully if you don’t hold the brush up too much and let it lie down and apply it gently. Once it is applied, we will move it using a magnet. Okay, I’m going to use this magnetic stick from Cocoist’s sister brand, Gelist

. Now, how to set up the magnet. With the Sate Magnet series, if you move it slowly like this, the powder of the magnet will rise like this, so for this design, it is up to you how you want the magnet to go in. It doesn’t really matter if it

‘s a freestyle style, so let’s start the powder and make it sparkle before moving on to the next step. Yes, it’s like this . Is it okay to feel like this? Yes, once the magnetic powder stands up and looks cute, let it harden. Once the Satay Magnet series has hardened,

Apply Velvet Matte Non-Wipe Top Coat Gel and let it harden completely. I think you could use a wipe-off type matte coat gel, but I prefer this velvet non-wipe one for the next step, so I use it . Now, once you have applied the matte code, let it completely harden

. Yes, the velvet matte has hardened and become matte. If you finish with the velvet matte coat when you move on to the next step , there won’t be any problems, but I’m going to layer gel on top of this, and

Today I’m going to layer a little bit of ink like this, but I don’t know how to proceed. When layering something on top of another, the surface may be a little rough and the material you put on top may bounce off , so I lightly wipe the surface with ethanol before

Moving on to the next step. Yes, you can use a light disinfectant ethanol to wipe the surface . Yes, it’s all ready. Here’s what we’ll be using next . I’m going to use Smoky Plum from Cocoist’s Bleeding Ink Smoky series. Yes, it has a structure that makes it

More difficult to fall over than regular bleeding ink bottles . The color will also be very cute. We will be using this today. Okay, this is the velvet non-wipe mat that I mentioned earlier. I’m going to draw a line with ink on the surface of the hardened top

, so I’m going to draw the line as it is, but if it’s left out of the bottle, it’ll be too thick. There may be a lot of blemishes, so please press it lightly with paper before drawing . When drawing the line later,

I think it’s better to apply it gently rather than pressing it too hard to avoid mistakes. At that time , it is important to move the tip, so please also move your left hand. This also applies when dealing with customers. Let’s draw the left hand in conjunction.

Now let’s add a line. Yes, if you draw it on the mat like this , it will look like this. Apply neatly. I will continue to draw more and more like this. This time we will cross in the opposite direction.

Yes, it’s like this. Even if you make a slight mistake and fall off, it will hide after this, so don’t worry too much about it. Okay, let’s put it in here after this.Okay , let’s put it in slowly.Once we have two intersecting ribbons, we’ll add a line on the side.

In the same way, apply the printing gently. Once the line you just drew is completely dry, draw another line slightly overlapping it. If you do that, it will look a bit like lace ribbons are layered on top of each other. Today I’m creating a design inspired by ballet toe shoes.

Once the lines are drawn, apply Ultra Glossy Non-Wipe Top Coat Gel and let it harden completely. Once applied, allow it to completely cure. Next, let’s start preparing the 3D ribbon. This is the one I use.It ‘s Boba Gel’s low, which I also love. I’ll use this one.

I’d like to add some color to this boba gel , but today I’m going to use the white Bleeding Ink. You can definitely add color by mixing Cocoist Color Gel with Boba Gel , but I don’t like the Cocoist Color Gel to get viscous and sticky when mixed with Boba Gel

, so today I’m going to use this bleeding ink. I’m going to use it. Later on, I will tell you about precautions when mixing bleeding ink, and I always use this kind of clear file. You can use a spatula to apply the boba gel wax on top of the clear file.

Just like this, just take a little bit out of the jar and place it on the clear file. Then, make a little indentation in the center of the boba gel and mix some bleeding ink into it. Unlike other bleeding inks, make sure to stir thoroughly before using

This white ink.I use a stirring ball that I bought myself. I’m adding an iron ball or something , but please make sure to stir it thoroughly.Okay , now let’s mix the bleeding ink. I’m going to put about three of them in the middle just like

This. You can adjust the amount of this bleeding ink by yourself depending on how much white density you want. Leave it like this, place the bleeding ink in the middle of the boba gel and let it volatilize. Wait for the solvent in the ink to evaporate before mixing. Once the volatile solvent evaporates,

Only the pigment remains, so the boba gel itself is almost never sticky. I’ll wait here for just a moment. Okay, it’s almost time. I think the solvent in the ink has evaporated, so let’s mix it up. It doesn’t really matter if you mix it up with a spatula , but I

Like to buy clear cases for trading cards like this at 100 yen stores, so I just put my finger in it and I do it myself like this. I’m going to mix it up and knead it like this.

The marble look in the middle is also cute, so I’m thinking of making art with it later . actually. cute! so cute! As you mix and knead it over and over again, you can see that the pigment from the ink is thoroughly mixed into the boba gel.

I think it’s starting to look a little milky. It’s cute even if it’s pure white, but the milky white color makes the ribbon a little softer, so I ‘m going to make a 3D version using a soft milky white ribbon like this . Yes, it was mixed well. Yes,

I think it has become a beautiful milky white color.Now , let’s knead it and make it into a stick. Now let’s make it into a stick shape like this. I’m going to do a little demo today, so I kneaded a lot, but

I’ve never used so much ribbon for the ribbon I’m about to make. Yes, like this in a stick shape Once done, use a spatula to create about 4 equally sized clumps like this. Prepare one more lump than these four, which is a little smaller than these four .

This is how I’m going to use this as a spare today, so I always make a lot of spares in an empty case like this . Let’s put a little bit into this. Yes, I will send it to the stockpile.

I think there are currently 5 pieces of Boba gel that have been torn off like this. These small ones are going to be used last, so first use silicone sticks or something like that to give these four little ones a little bit of a round shape. We will continue to connect.

Yes, I think it’s okay if they are roughly the same size like this. The four pieces you just kneaded are now about the same size. Okay, now we’re going to create a 3D ribbon using this boba gel. When you think of 3D embossing art,

You tend to think of it as being made with acrylic powder, but if you use Boba Gel’s Low, it will move at all until it hardens, so it’s perfectly fine to do it slowly. So I think it’s very easy to make, even for beginners.Today,

I made the ribbon embossed art easy, so I hope you’ll give it a try. Okay, here we go, we’re going to put the ribbon on the base. Now, if you knead one side of the Nemaru dumpling you made earlier

And compare it to the other three, you’ll notice that it’s shaped like a drop.Let’s make it into a drop shape. I’ll make it into drops like this too. For now, please leave these four alone . Like this. Okay, let’s make the ribbon. Okay, first take the first drop, and as a guideline,

Place it on the first cross you drew, like this . Yes, you can see how it’s starting to turn into a ribbon. Today I will be making it using only Cocoist silicone sticks. I think any silicone stick will do, so

Try using something that is easy to use. There are some drops now, so I’m going to crush them a little bit here. I’ll destroy it like this. Yes, it looks like a ribbon. I made some drops and put them on it earlier, so

I think it already looks like a ribbon at this point . After crushing it like this, use the right corner of the silicone stick to make a depression in the middle of the ribbon like this. If a dent is formed, just use a stick to flatten it and spread it out a little.

From there, try asking people around you again. Do you see how it looks like a knot? Now, let’s adjust the shape to make it look like a ribbon. Yes, if you are worried, make one sheet and temporarily cure it.

I think it’s okay if you do this. Yes, I’m going to pop the droplets I made earlier on the other side as well . Yes, then I’ll show you how to make it. Crush it first . Yes, I’ll destroy it. Then, put a silicone stick on one side and

Make a score. It’s like this. Then try to spread out that muscle, okay, okay, I’ll spread it out a little bit. Once you do that, I’ll bring it back together again from here to give it a bit of a pleat look and adjust the shape of the ribbon. It looks

A lot like a ribbon, doesn’t it? Please cure once here. Yes, it’s a boba gel, so I think it would be nice if it could harden a little longer. Here, the two Baba gels I put on earlier have hardened. Next, we’ll create the part where the knot will come out below .

Yes, I think I made four droplets, so next I’ll make the third one. I’m going to put this on. This time, I’m going to put this droplet on this side, whether it’s from the left or the right. Once you’ve connected it all the way to the knot , insert

The silicone stick along the ribbon line like this. If you do that, you’ll notice that one side of the ribbon is a little thinner , and there’s a knot underneath the ribbon. I think the pilon part now pops out, giving it a bit of a three-dimensional effect.

I’m thinking of shaping it like this, inserting a silicone stick firmly into the knot here, and making it thinner along the line of the ribbon like this.Okay, then here’s the tip of the ribbon. You can shape it , you can shape it like this, you can do anything you like, but it looks

Like a ribbon like this. It has become quite a ribbon. Okay, let’s make the other side . Okay, use the last drop on the other side and pop it on here. The method for making this side is the same. First, I’m going to tie this up, and

Then I’m going to insert a silicone stick diagonally into the ribbon line, and I’m going to start by flattening it out to this side. It’s like making it thinner on one side and giving it a little more edge. Okay, then I

Used a silicone stick to adjust the shape on the other side as well, and it’s starting to look like a ribbon. It’s like this, it’s cute, cute. You should now see the tip of the ribbon swoosh knot, so let it harden completely once again. Yes, that’s the last one.

Lastly, this is the center of this ribbon.It’s tied like this.It’s right in the middle.I think it would be cute if you put some pearls on it, but today, I’m going to use boba gel as is. Yes , I’m going to pop the last little one in the middle like this .

Then I used a silicone stick to push it in a little bit so it would blend in a little bit . I’ll let you get used to it.Yes , Teten! It’s now a ribbon. It became a ribbon. Yes, it’s cute ♡ It’s cute ♡ Yes, please let it fully harden again.

So, lastly, since the base is finished by applying the top coat, I will apply Top Gel Ultra Glossy just to finish the ribbon and harden it. At this time, if a lot of Ultra Glossy is applied to this ribbon, the

Three-dimensional effect will be lost in the concave part of the folds and the knot, so please adjust the amount of Ultra Glossy here and apply it thinly. Yes, I wouldn’t say it’s cascading, but I adjust it a little thinner and apply it.

Okay, now that you’ve applied Ultra Glossy to the ribbon, let it harden completely. Yes, it’s completed. This way, the base is glossy and the ribbon is silky. How about that? Were you able to make it cute too? Yes, I also

Tried making color variations. Today, when I was doing a demo, it was hard to see the ribbon, so I used a white ribbon, but here it is. On top of the smoky plum, I mixed the boba gel with white ink and added

A little bit of this smoky plum. I mixed it up and made it into a colored ribbon. Similarly, this middle one is smoky indigo. Yes, I mixed in some smoky indigo to make it a bit blue, and

Next to that I colored it with some smoky mushrooms. The one on the far left is colored with smoky charcoal.The base for everything is Boba Gellow mixed with this white ink. I make this by mixing ink little by little. Bleeding ink itself is clear, so

It’s the same with boba gel and colored smoky series, or regular standard ink, but when you mix it , it becomes a bit clear, so if you could make this white boba gel as a base, You can easily make colored ones like this , so

I think it’s a good idea to stock up on Bobaro Gel Low mixed with white ink. Same base except for smoky mushrooms I’m using Satay Magnet’s No. 19 mauve satin, and this base, which has a line made from smoky mushroom and a ribbon colored with smoky mushroom,

Is chocolate satin from the satin series. This is cute too. It was also cute when paired with the chocolate color. Yes, it looks like this. You can make a wide variety of colors, so please give it a try. Yes, it may be difficult at first

, but if you practice, it will become easier and faster to make, so please give it a try. Afterwards, once you get used to it, you can evolve the 3D nature of the ribbon and add creases to create a more three-dimensional effect. If you practice, you

Will be able to expand the variations of embossing, so please give it a try. I think you can easily make not only ribbons but also hearts. Yes, I think you can do it, so please give it a try. Thank you for watching until the end

. Please also subscribe to the YouTube Cocoist channel . My name was Cocoist Art Director Miki Nohara. thank you very much.

バレエコアネイルとは・・・
「バレエコア」とは、バレエをする時に使われている「チュール」や「サテン生地」「トゥーシューズ」などコーデに取り入れた今話題沸騰中のファッションスタイルのひとつです✨

ネイルでも最近はやり始めています！
と言う事で、野原先生が「バレエコアネイル」をご紹介！

ジェルで作る3Dの作り方が必見！
初心者の方も練習すればできる様にとても分かりやすく解説してくれています✨
アクリルパウダーで3Dを作るのが苦手な方にもお勧めです。

やり方さえ覚えたら他の形の応用もできるので
ぜひ、皆さん真似して作ってみてください★

KOKOISTの商品は全国のKOKOIST取り扱いネイル問屋さま、またはココイスト オンラインショップにてお買い求めいただけます。

▼KOKOIST エデュケーターリスト▼
https://www.kokoist.com/educators/

▼KOKOIST セミナー情報はこちら
kokoist_seminar.jp（Instagram）
https://www.instagram.com/kokoist_sem…

▼Lit LinkからKOKOISTの各SNSをご確認いただけます。
https://lit.link/kokoist

Please purchase products at nail dealers throughout Japan or KOKOIST online shop

◆KOKOISTオンラインショップ
https://www.kokoist.shop/

【KOKOIST JAPAN】

KOKOISTホームページ

ホーム

音源：YouTube オーディオライブラリ

#KOKOIST #ココイスト​
#ネイル #ネイルアート2023春夏